Established 2003

Specializing In Sportsters

FULL REBUILDS - HARDENED VALVE SEATS - CYLINDER BORING - HELIARC/CASE REPAIR - MACHINE SHOP
CASE BEARING RACE LINE LAPPING - ROD RACES LAPPED TO SIZE - MAGNETO TESTING AND REPAIR

Generic XL Wiring

The following two diagrams can be used as is for basic wiring on almost any XL. Please note, these diagrams are not intened to coincide with any HD wiring diagram. No effort whatsover was made to make these compatable with any HD diagram. If any of the wiring matches up to an HD diagram it is purely by coincidence. In other words, do not use these diagrams to troubleshoot a wiring problem on your bike. However, if you want to tear out all the old wiring and start over, these diagrams are just what you need. These diagrams will also probably work on just about any generator/points Harley, including many Flatheads, Knuckleheads, Panheads and Shovelheads. These diagrams assume you have a generator with the built in regulator like the CycleElectric models. If you don't have a CycleElectric generator with built in regulator, get one, your charging problems will be over. Yes, they are expensive, but, aren't you tired of being stranded somewhere at 2AM?

The full sized version of pictures on this website can be viewed by right clicking on the picture and selecting "VIEW IMAGE", then use your browser back button to return to the web page...

Wiring Kick Start

Wiring Electric Start
 
 

SERVICES

Buy and Sell Ironheads - Buy and Sell Ironhead Parts - Rebuild Ironheads - Specialty Work - Wheel Building and Lacing - Wiring - Engine Rebuilding - Transmission Rebuilding - Flywheel Trueing - Line Lap Case Bearing Races - Lap Rod Races - Valve Jobs - Install Hardened Seats - Cylinder Boring - Heliarc Welding - Lathe and Mill Work - Powder Coating

All work is performed in house in a fully equipped shop.

GET IN TOUCH

IronHeadCycle LLC
North Texas
United States of America
Phone: 940-297-5009
Send a Message to IronHeadCycle

DISTRIBUTOR FOR:

Eastern

V-Twin

Colony