Established 2003

Specializing In Sportsters

FULL REBUILDS - HARDENED VALVE SEATS - CYLINDER BORING - HELIARC/CASE REPAIR - MACHINE SHOP
CASE BEARING RACE LINE LAPPING - ROD RACES LAPPED TO SIZE - MAGNETO TESTING AND REPAIR

IronHeadCycle Services Offered and Pricing*

Service

What's Included

Price

Lower End Rebuild
  • Cases Cleaned and Sandblasted
  • Rods Lapped to Next Oversize Bearings
  • Flywheels Trued
  • Cases Assembled
$1200
Valve Job With
Hardened Seats
  • Old Valve Seat Milled Out
  • Pocket Cut for Hardened Seat
  • Hardened Seat Pressed In
  • Three Angle Seat Cut
  • Valves Lapped and Leak Checked
$400 Per Head
Standard Valve Job
  • Three Angle Seat Cut
  • Valves Lapped and Leak Checked
$200 Per Head
Cylinder Bored
  • Cylinder Bored to size with Kwik Way Boring Bar
  • Honed to Final size with Sunnen Rigid Hone
$200 Per Cylinder
Transmission Rebuild
  • Clearances Checked
  • Shifter Forks Sized
  • Shaft Endplay Set
$300
Engine Rebuild
  • All of the above, EXCEPT hardened seats not included
$2300
Intake Port Flange Repair $180 Per Head
Dual Plug Head (1000cc Only)
  • Head drilled for second plug
  • Plug located oposite of original plug
  • YOU will have to notch rocker box for clearance
  • See It Done on YouTube
$180 per head
Any Repair Not Listed Above
  • Per customer request
$100/hour
Full Bike Build-Restore
  • Per customer request
$100/hour

* Does not include shipping, heliarc welding, special repairs or special machining. Flat rates are applicable to "normal" engines/components only. Engines/components found to be excessively rusted or corroded will be charged the hourly rate for any addition cleaning, sand blasting, paint removal or  polishing required beyond normal.  Furthermore engines assembled from mismatched components (e.g. none matching crankcase halves) will be charged the hourly rate for additional fitting time required. Charges beyond the flat rate are made at the sole discretion of IronHeadCycle.  All prices subject to change without notice. Parts are NOT included in above prices. A 50% deposit will be required prior to starting work. These prices apply to Ironheads only. 

Terms and Conditions

I accept postal money orders, certified checks, credit cards, PayPal, gold bricks and good old cash. Payment is required before shipping. Prices do not include shipping. I will estimate, as best as possible, costs for big jobs. One half deposit will be required before I start work. If, after 30 days, I have not received a deposit, you will be charged $100/month storage. If, after 180 days, I have not received a deposit, your parts/bike will be sold to cover storage costs. If, 30 days after completion of work, I have not received payment in full, you will be charged 100/month storage. If, after 180 days, I have not received payment in full, your parts/bike will be sold to cover costs. IronHeadCycle is now operating as an insured LLC.

Non-flat rated repairs are charged by time and materials, the labor rate is $100.00/hour.


SERVICES

Buy and Sell Ironheads - Buy and Sell Ironhead Parts - Rebuild Ironheads - Specialty Work - Wheel Building and Lacing - Wiring - Engine Rebuilding - Transmission Rebuilding - Flywheel Trueing - Line Lap Case Bearing Races - Lap Rod Races - Valve Jobs - Install Hardened Seats - Cylinder Boring - Heliarc Welding - Lathe and Mill Work - Powder Coating

All work is performed in house in a fully equipped shop.

GET IN TOUCH

IronHeadCycle LLC
North Texas
United States of America
Phone: 940-297-5009
Send a Message to IronHeadCycle

DISTRIBUTOR FOR:

Eastern

V-Twin

Colony