Ironhead Services Offered/Pricing*

Service

Whats Included

Price

Lower End Rebuild
  • Cases Cleaned and Sandblasted
  • Rods Lapped to Next Oversize Bearings
  • Flywheels Trued
  • Cases Assembled
$1200
Valve Job with Hardened Seats
  • Old Valve Seat Milled Out
  • Pocket Cut for Hardened Seat
  • Hardened Seat Pressed In
  • Three Angle Seat Cut
  • Valves Lapped and Leak Checked
$300 Per Head
Standard Valve Job
  • Three Angle Seat Cut
  • Valves Lapped and Leak Checked
$150 Per Head
Cylinder Bored
  • Cylinder Bored to Within .001" to .002" with Kwik Way Boring Bar
  • Honed to Final size with Sunnen Rigid Hone
$150 Per Cylinder
Transmission Rebuild
  • Clearances Checked
  • Shifter Forks Sized
  • Shaft Endplay Set
$150

* Does not include shipping, heliarc welding, special repairs or special machining. All prices subject to change without notice. Parts are NOT included in above prices. A 50% deposit will be required prior to starting work. These prices apply to Ironheads only.

None flat-rated repairs are charged by time and materials, the labor rate is $65.00/hour.